4 Wan Equal Load Balancing PPPoE Clients (PCC)

Ether 1 = DSL 1 = 192.168.1.1
Ether 2 = DSL 2 = 192.168.2.1
Ether 3 = DSL 3 = 192.168.3.1
Ether 4 = DSL 4 = 192.168.4.1
Ether 5 is your Local  192.168.5.1

/interface ethernet

set [ find default-name=ether1 ] name=ether1

set [ find default-name=ether2 ] name=ether2

set [ find default-name=ether3 ] name=ether3

set [ find default-name=ether4 ] name=ether4

set [ find default-name=ether5 ] name=ether5

/ip address

add address=192.168.1.2/24 interface=ether1 network=192.168.1.0

add address=192.168.2.2/24 interface=ether2 network=192.168.2.0

add address=192.168.3.2/24 interface=ether3 network=192.168.3.0

add address=192.168.4.2/24 interface=ether4 network=192.168.4.0

add address=192.168.5.1/24 interface=ether5 network=192.168.5.0

/interface pppoe-client

add add-default-route=yes disabled=no interface=ether1 max-mru=1480 max-mtu=\

    1480 name=pppoe-out1 password=#PWD use-peer-dns=no user=#USER1

add add-default-route=yes disabled=no interface=ether2 max-mru=1480 max-mtu=\

    1480 name=pppoe-out2 password=#PWD use-peer-dns=no user=#USER2

add add-default-route=yes disabled=no interface=ether3 max-mru=1480 max-mtu=\

    1480 name=pppoe-out3 password=#PWD use-peer-dns=no user=#USER3

add add-default-route=yes disabled=no interface=ether4 max-mru=1480 max-mtu=\

    1480 name=pppoe-out4 password=#PWD use-peer-dns=no user=#USER4

/ip pool

add name=dhcp_pool1 ranges=192.168.5.2-192.168.5.254

/ip dhcp-server

add address-pool=dhcp_pool1 disabled=no interface=ether1 name=dhcp1

/ip dhcp-server network

add address=192.168.5.0/24 gateway=192.168.5.1

/ip dns

set allow-remote-requests=yes cache-size=15000KiB servers=\

    208.67.222.222,208.67.220.220

/system note set note="Server Configuration By <HAMZA KHALIL> (www.itlearnweb.com)" show-at-login=yes

/ip firewall mangle

add chain=prerouting in-interface=pppoe-out1

add chain=prerouting in-interface=pppoe-out2

add chain=prerouting in-interface=pppoe-out3

add chain=prerouting in-interface=pppoe-out4

add action=mark-connection chain=prerouting dst-address-type=!local \

    new-connection-mark=wan1_conn per-connection-classifier=\

    both-addresses-and-ports:4/0

add action=mark-connection chain=prerouting dst-address-type=!local \

    new-connection-mark=wan2_conn per-connection-classifier=\

    both-addresses-and-ports:4/1

add action=mark-connection chain=prerouting dst-address-type=!local \

    new-connection-mark=wan3_conn per-connection-classifier=\

    both-addresses-and-ports:4/2

add action=mark-connection chain=prerouting dst-address-type=!local \

    new-connection-mark=wan4_conn per-connection-classifier=\

    both-addresses-and-ports:4/3

add action=mark-routing chain=prerouting connection-mark=wan1_conn \

    new-routing-mark=to_wan1

add action=mark-routing chain=prerouting connection-mark=wan2_conn \

    new-routing-mark=to_wan2

add action=mark-routing chain=prerouting connection-mark=wan3_conn \

    new-routing-mark=to_wan3

add action=mark-routing chain=prerouting connection-mark=wan4_conn \

    new-routing-mark=to_wan4

/ip firewall nat

add action=masquerade chain=srcnat out-interface=pppoe-out1

add action=masquerade chain=srcnat out-interface=pppoe-out2

add action=masquerade chain=srcnat out-interface=pppoe-out3

add action=masquerade chain=srcnat out-interface=pppoe-out4

add action=masquerade chain=srcnat comment="Masquerade Dhcp Network" src-address=192.168.5.0/24

/ip route

add check-gateway=ping distance=1 gateway=pppoe-out1 routing-mark=to_wan1

add check-gateway=ping distance=1 gateway=pppoe-out2 routing-mark=to_wan2

add check-gateway=ping distance=1 gateway=pppoe-out3 routing-mark=to_wan3

add check-gateway=ping distance=1 gateway=pppoe-out4 routing-mark=to_wan4

add check-gateway=ping distance=1 gateway=pppoe-out1

add distance=2 gateway=pppoe-out2

add distance=3 gateway=pppoe-out3

add distance=4 gateway=pppoe-out4

MikroTik Send Email When CPU Goes On 100%

/system script
add comment="Send Email When CPU  Goes 100%(www.itlearnweb.com)" name=cpu owner=admin policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive source=":global sub1 ([/system identity get name])\r\
    \n:global sub2 ([/system clock get time])\r\
    \n:global sub3 ([/system clock get date])\r\
    \n:global sub4 \"CPU LOAD 100%\"\r\
    \n:global adminrece #YOUR@gmail.com\r\
    \n:global gmailid #YOUR@gmail.com\r\
    \n:global user #USER\r\
    \n:global gmailpwd #YOUR PWD\r\
    \n:global gmailip 74.125.136.108\r\
    \n/tool e-mail \r\
    \nset address=\$gmailip from=\$gmailid password=\$gmailpwd port=25 start-tls=yes user=\$user\r\
    \n/tool e-mail send to=\$adminrece subject=\"\$sub4 \$sub3 \$sub2 \$sub1\" body=\"Please Check something is wrong ##CPU 100%## \"\r\
    \n/"
/system scheduler
add comment="Send Email When CPU  Goes 100%(www.itlearnweb.com)" interval=5s name=cpu on-event=\
    ":if ([ /system resource get cpu-load]>100) do={ /system script run [find name=cpu]; }\r\
    \n/" policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-time=startup
/system note set note="Server Configuration By <HAMZA KHALIL> (www.itlearnweb.com)" show-at-login=yes

Reboot MikroTik When CPU Load 100%

/system scheduler
add comment="Reboot Server If CPU 100%" interval=3s name=cpu on-event=\
    ":if ([ /system resource get cpu-load]>100) do={ /system reboot; }\r\
    \n/" policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive start-time=startup

Send Mikrotik Log Every Day Via E-mail

Send Mikrotik Log Every Morning 7:00 AM
Just copy and paste

/system script
add name=log owner=admin policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive source=":log warn\
    ing \"Mikrotik Log File Sending By www.itlearnweb.com....\"\r\
    \n:global sub1 ([/system identity get name])\r\
    \n:global sub2 ([/system clock get time])\r\
    \n:global sub3 ([/system clock get date])\r\
    \n:global sub4 Log\r\
    \n:global adminrece #YOUR@gmail.com\r\
    \n:global gmailid #YOUR@gmail.com\r\
    \n:global user #USER\r\
    \n:global gmailpwd #PASSWORD\r\
    \n:global gmailip 74.125.136.108\r\
    \n:log warning \"Creating Log File.....\"\r\
    \n:delay 5s\r\
    \nlog print file=\"log \$sub1\"\r\
    \n/tool e-mail \r\
    \nset address=\$gmailip from=\$gmailid password=\$gmailpwd port=25 start-tls\
    =yes user=\$user\r\
    \n/tool e-mail send to=\$adminrece subject=\"\$sub4 \$sub3 \$sub2 \$sub1\" f\
    rom=\$gmailid file=\"log \$sub1\"\r\
    \n server=\$gmailip start-tls=yes\r\
    \n:log warning \"Sending Log File.....\"\r\
    \n:delay 5s\r\
    \n/system logging action set memory memory-lines=1\r\
    \n/system logging action set memory memory-lines=1000\r\
    \n/file remove \"log \$sub1\"\r\
    \n:log warning \"Log Cleared & Removed Log File By www.itlearnweb.com.......\
    ...\""
/system scheduler
add comment="Log Send Via Email  Every Day 7:00AM" interval=1d name=\
    "Log Send Via Email" on-event=log policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=\
    jul/17/2016 start-time=07:00:00
/

DOWNLOAD SCRIPT

Send UserManger Database Through Email

:log warning "UserManger Database Sending By www.itlearnweb.com...."
:global sub1 ([/system identity get name])
:global sub2 ([/system clock get time])
:global sub3 ([/system clock get date])
:global sub4 Usermanger
:global adminrece #YOUR@gmail.com
:global gmailid #YOUR@gmail.com
:global user #USER
:global gmailpwd  #PASSWORD
:global gmailip 74.125.136.108
:log warning "Creating New Database....."
/tool e-mail
set address=$gmailip from=$gmailid password=$gmailpwd port=25 start-tls=yes user=$user
/tool user-manager database save name=database
/tool e-mail send to=$adminrece subject="$sub4 $sub3 $sub2 $sub1 Usermanger Database" from=$gmailid file=database.umb server=$gmailip start-tls=yes
:delay 30s
/file remove database.umb
:log warning "Usermanger Database File Removed ...."
/

FULL SCRIPTS

Non Payment Reminder For PPPoE Users

/ip proxy
set enabled=yes max-cache-size=none parent-proxy=0.0.0.0 src-address=0.0.0.0
/ip proxy access
add action=deny dst-host=!itlearnweb.comli.com redirect-to=\
    itlearnweb.comli.com/
/ip pool
add name=block ranges=172.16.100.1-172.16.100.254
/ip firewall filter
add action=drop chain=forward comment="Block Access For ''Non Payment Users''" \
    dst-port=!80 log-prefix="" protocol=tcp src-address=\
    172.16.100.1-172.16.100.254
/ppp profile
add dns-server=8.8.8.8,8.8.4.4 local-address=10.10.0.1 name="Non Payment" \
    rate-limit=256K/256K remote-address=block

Read Full Scripts

Users Base Policy Routing

1. Policy Base Rounting....  

/ip route
add gateway=192.168.1.1 routing-mark=ISP-1
add gateway=192.168.2.1 routing-mark=ISP-2
/ip route rule
add dst-address=192.168.11.0/24 action=lookup table=main
add dst-address=192.168.12.0/24 action=lookup table=main
add dst-address=192.168.1.0/24 action=lookup table=main
add dst-address=192.168.2.0/24 action=lookup table=main
add src-address=192.168.1.0/24 action=lookup table=ISP-1
add src-address=192.168.2.0/24 action=lookup table=ISP-2
add routing-mark=ISP-1 action=lookup table=ISP-1
add routing-mark=ISP-2 action=lookup table=ISP-2

/system note set note="Server Configuration By <HAMZA KHALIL> (www.itlearnweb.com)" show-at-login=yes
/ip firewall mangle
add chain=prerouting src-address=192.168.11.0/24 action=mark-routing \
new-routing-mark=ISP-1 passthrough=no
add chain=prerouting src-address=192.168.12.0/24 action=mark-routing \
new-routing-mark=ISP-2 passthrough=no

2. DHCP Server

For DHCP Setup Click Here

2nd Method.. 
Use One Mikrotik or Cisco Manageable Switch With Vlans... 

How To Set Correct Interface Names

1st Method Change The Name ..

• /interface ethernet
• set [ find default-name=ether1 ] name=ether1
• set [ find default-name=ether2 ] name=ether2
• set [ find default-name=ether3 ] name=ether3
• set [ find default-name=ether4 ] name=ether4
• set [ find default-name=ether5 ] name=ether5
• set [ find default-name=ether6 ] name=ether6
• set [ find default-name=ether7 ] name=ether7
• set [ find default-name=ether8 ] name=ether8
• set [ find default-name=sfp1 ] name=sfp1

2nd Method Set The Comments .. 

• /interface ethernet
• set [ find default-name=ether1 ] comment=ether1
• set [ find default-name=ether2 ] comment=ether2
• set [ find default-name=ether3 ] comment=ether3
• set [ find default-name=ether4 ] comment=ether4
• set [ find default-name=ether5 ] comment=ether5
• set [ find default-name=ether6 ] comment=ether6
• set [ find default-name=ether7 ] comment=ether7
• set [ find default-name=ether8 ] comment=ether8
• set [ find default-name=sfp1 ] comment=sfp1