Sunday, June 28, 2015

MikroTik Wireless Security configuration

  1. At "names" you give the security profile name, as an example "home".
  2. In "authentication types" state "WPA PSK and WPA2 PSK already checked.
  3. In "unicast ciphers" state "AES CCM checked.

  4. Under "WPA pre-shared key" and "WPA2 pre-shared key is a password difficult to guess, click on" apply "and" OK "to save this profile

    For "security profile" as in this example, select "Password", click "apply" then "ok". For example, the access point can be used and protected.


Post a Comment